
Product Introduction
About the Orthopedic Mobile C Arm X Ray Machine:
Details Of Orthopedic Mobile C Arm X Ray Machine
C-arm Gantry
Lateral movement:250mm
Vertical lifting movement:450mm
Swing left & right: 25°(±12°, error ±1°)
C-arm depth:780mm
C-arm opening: 820mm
SID:1050mm
X-ray Generator
High-frequency inverter frequency: 40kHz
Input power voltage: 220VAC±10%
Input power frequency: 50Hz±1Hz
Output power: 5KW(100kV、50mA、0.1s)
Fluoroscopy tube voltage: 40-120KV
Radiography tube voltage: 40-120KV
Tube current: 0.2-100mA
Rotating anode, dual focus, small 0.3mm, large 0.6mm
The minimum inherent filter under 80kV: 2mmAL
Anode heat capacity: 150KJ(200KHU)
Dynamic FPD
Type: Amorphous silicon CsI
Nominal area: 210mm×210mm
Pixel pitch: 205μm
Matrix: 1024×1024
Spatial frequency: 2.5lp/mm
AD range: 16bits
Pixel greyscale: 65536 gradations
Size: 270×275×54mm
Maximum acquisition rate: 30FPS
Collimator
X-ray filed size:0~35cm×35cm@100cm SID continuous adjustable
Two pairs electric square lead sheets, the filed can be expanded or reduced, electric control, independent control on both sides
An electric lung field iris copper sheet, iris collimator can rotate counterclockwise/clockwise, can be opened and closed
Additional filters: Air; 1mmAl+0.1mmCu; 1mmAl+0.2mmCu; 2mmAl
Image acquisition & processing system
1*PC, CPU2.8GHz, 8GB memory, 1T hard disk,120GSSD, 2 *USB2.0 interface
2*19' touch-screen medical monitors on trolley
1* 13.3' touch-screen monitor on C-arm gantry
Monitor: DICOM calibration function, meets DICOM standard
Image post-processing
Window width/level adjustment
Recursive noise reduction
Imaging zoom
Magnifier
Image rotation
Horizontal image
Vertical image
Annotation, including polygon, circle, rectangle, line, arrow, and test.
Line segment and angle measurement function
Fluoroscopy
3 FLU modes: normal FLU, low-dose FLU, and high-dose FLU
Supporting continuous fluoroscopy and pulse fluoroscopy
Last image hold function after fluoroscopy
Pulse fluoroscopy supports 1、2、4、8、16、30pps
Pulse fluoroscopy support pulse width: 8、16、40、80ms
Radiography
Spot film & CINE
CINE mode supports 6 different frames: 1,2, 4, 8, 16, 30fps
Loading time in CINE mode: 8, 16, 40, 80ms
Spot film supports 0.4-320mAs,R’10
Loading time in spot film mode: 40-4000ms, R’10

Elfinbot 100

Foot Switch
Hot Tags: orthopedic mobile c arm x ray machine, suppliers, factory, pricelist, Italy, Europe, CE, for sale, c arm, c arm fluoroscopy, flat panel detector c arm, 3d Mobile C arm, c arm medical equipment, Surgery C Arm X Ray Machine
You Might Also Like
Send Inquiry


