High Frequency Mobile Digital C-Arm System (CX7000B)

We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for digital radiogrpahy x ray machine, cross surgery room, 25kw Digital Substraction Angiography System. We carry out in-depth communication with customers for more accurate demand analysis. On the basis of mutual trust and understanding, we seek to establish long-term and stable relationships with customers, suppliers and stakeholders. We uphold the quality policy of abiding by laws and regulations to ensure the safety of employees, and continuous innovation and social responsibility. We adhere to the development strategy of talent strengthening enterprise and care for every employee.

About The C Arm X Ray System For Spinal Surgery:

Applications Of The C Arm X Ray System For Spinal Surgery:

Orthopedic dep. Spinal surgery dep. Gastroenterology dep. obstetrics and gynecology dep.

The Characteristics Of The C Arm X Ray System For Spinal Surgery:

X-ray generator

• High-frequency inverter frequency: 40kHz

• Input power voltage: 220VAC±10%

• Input power frequency: 50Hz±1Hz

• Output power: 5KW(100kV、50mA、0.1s)

• Fluoroscopy tube voltage: 40-120KV

• Radiography tube voltage: 40-120KV

• Tube current: 0.2-100mA

• Rotating anode, dual focus, small 0.3mm, large 0.6mm

• The minimum inherent filter under 80kV: 2mmAL

• Anode heat capacity: 150KJ(200KHU)

• Anode heat dissipation: 300W

• X ray tube unit heat capacity: 1300KHU

Collimator

• X-ray filed size：0～35cm×35cm@100cm SID continuous adjustable

• Two pairs electric square lead sheets, the filed can be expanded or reduced, electric control, independent control on both sides

• An electric lung field iris copper sheet, iris collimator can rotate counterclockwise/clockwise, can be opened and closed

• Additional filters: Air; 1mmAl+0.1mmCu; 1mmAl+0.2mmCu; 2mmAl

Dynamic Flat Panel Detector

• Type: Amorphous silicon CsI

• Nominal area: 210mm×210mm

• Pixel pitch: 205μm

• Matrix: 1024×1024

• Spatial frequency: 2.5lp/mm

• AD range: 16bits

• Pixel greyscale: 65536 gradations

• Size: 270×275×54mm

Grid

• Ratio: 10:1

• Density: 60L/CM

• Focal length: 110CM

C-arm gantry

• Lateral movement: 250mm

• Vertical lifting movement: 450mm

• Swing left & right: 25°(±12°,error ±1°)

• C arm orbital range: 135°(-45°～90°)

• CRA/CAU: 90°/45°

• Rotate around the horizontal axis: ±225°

• LAO/RAO: -225°/225°, error ±1°

• C arm depth: 780mm

• C arm opening: 820mm

• SID:1050mm  

 Imaging acquisition & processing system

• 1*PC, CPU2.8GHz, 8GB memory, 1T hard disk，120GSSD, 2 *USB2.0 interface

• 2* 19’ touch-screen medical monitors on trolley; 1* 13.3’ touch-screen monitor on C-arm gantry

• Monitor resolution: 1280×1024

• Monitor brightness: 250cd/m2

• Monitor contrast: 1000：1

• Monitor interface: D-sub or DVI

• Monitor: DICOM calibration function, meets DICOM standard

Since the establishment of our company, we are in line with the business purpose of 'reducing costs, ensuring quality, paying attention to credibility, timely delivery', and our High Frequency Mobile Digital C-Arm System (CX7000B) are exported to many countries and regions. We have established a long-term, close and stable cooperative relationship with our customers. The company not only provides professional manufacturing, but also establishes a high-quality before-sale and after-sales service system to provide guidance and assistance for the problems and difficulties encountered in the development of the company.

Hot Tags: c arm x ray system for spinal surgery, suppliers, factory, pricelist, Italy, Europe, CE, for sale, Interventional Radiology System, 3d Mobile C arm, Digital Subtraction Angiography System, patient bed, x ray angiography, electric floating operation table